TEFAL CORDLESS ST. CLEANER X-PERT 3.60 TY6935HO

The TEFAL X-Pert Cordless Vacuum Cleaner

Putting 3-in-1 versatile performance at your fingertips with long running-time and fast results, the X-Pert 3.60 Cordless Vacuum Cleaner was designed to make home cleaning effortless. A high-quality Lithium battery delivers 45 minutes of autonomy (when using the handheld on Min position) and ensures long-lasting cleaning performance. This 3-in-1 vacuum cleaner provides easy access to every inch of your home, for cleaning coverage from floor to ceiling, with a suction head equipped with LED lights for easier dust tracking in low and hard-to-reach areas. Everything you need is close at hand, for fast and convenient cleaning, without compromise on performance thanks to the combination of a motorized brush, a high-performance DC motor and cyclonic technology.

*maximum autonomy when using the handheld on Min position

Essentials

45 minutes* of autonomy
Up to 45-minute running time* to let you clean whenever and wherever you want with no constraints.
Motorized brush for quick cleaning
Achieve fast cleaning sessions with a motorized brush that picks up dust in a single stroke, removing dust in no time for a clean and more pleasant home
22V Lithium battery
A high-quality Lithium battery with 22V for easier home cleaning that lasts up to two times longer than an NiMH battery.
3-in-1 cleaning from floor to ceiling
Discover the one gesture efficiency, with a product designed to reach every inch of your home, from floor to ceiling.
Ultra-light
Only 2.2kg for effortless and fast cleaning
LED lights for better visibility
Track dust under low furniture and into hard-to-reach areas with a motorized head featuring high-quality LED lights, for improved visibility and easier cleaning.
Enhanced comfort in use
- Wall mount base for easy product and accessories storage

- Small brush to vacuum easily on surfaces

- Crevice tool to remove dust from narrow areas
All-floors = 1 brush
The motorized brush is efficient on all types of floors
Easy-charging with removable battery
4-hours of easy charging with removable battery

‹ ›

Features

‹	CORDLESS ST. CLEANER X-PERT 3.60
Cordless handstick category	All in 1 handstick
Technology	Cyclonic Technology
Power speed position	2
Your habits	Easy, quick and daily cleaning
Usage	Multi-surface (3 in 1)
Vacuum efficiency	3-4
Battery type	Lithium ion
Voltage	22V
Recharging type	Jack plug
Vision System: 'LED lighting'
Suction Head shape	Rectangular
Crevice Tool
Easy brush
Charging Base
Handstick weight	Very light (<2.5 kg)
Format	Standard
Type of plug	UK
	Buy online

Documentation

FAQ

Technical support

Your device stops during operation and the light/s flash very quickly.

Your device may be overheating.
Turn the device off and let it cool for at least 1 hour.
If the problem persists, contact Customer Service.

The charger is connected but your device is not charging.

The charger is not properly connected to the device or is faulty.
Check that the charger is properly connected or contact an Approved Services Centre to change the charger.

The device has stopped after the charge light flashed.

The device is discharged, please recharge it.

The charger becomes hot.

This is perfectly normal. The vacuum cleaner can remain permanently connected to the charger without any risk.

The power-brush stops during use of the vacuum cleaner.

The heat safety device has triggered.
Stop the vacuum cleaner. Check that nothing is obstructing the rotation of the brush. If there is an obstruction, remove it and clean the power-brush, then turn on the vacuum cleaner.

Your vacuum cleaner suction is not working properly or is making a whistling noise.

• The tube or hose is partially blocked: unblock them.
• The dust collector is full: empty it and clean it.
• The dust collector is not properly fitted: re-position it correctly.
• The suction head is dirty: remove the power-brush and clean it.
• The foam motor protection filter is full: clean it.

The power-brush is not working properly or makes a noise.

• The rotating brush or hose are obstructed: stop the vacuum and clean the parts.
• The brush is worn: contact an Approved Service Centre to change the brush.
• The belt is worn: contact an Approved Service Centre to change the belt.

When charging the vacuum cleaner, the light(s) flash very quickly.

The correct charger is not being used or the charger is faulty.
Talk to an Approved Service Centre to change the charger.

What should I do if my appliance is not working?

After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre

What should I do if the power cord of my appliance is damaged?

Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.

Why is my vacuum cleaner's performance going down?

Check the filter, if it is in bad condition, change it.
Empty the dust container.
Check the brush condition and refurbish or change it if necessary.

Why is the autonomy of my vacuum cleaner decreasing?

Check that the battery is fully charged after a complete charging cycle.
If the battery is faulty, please replace it.

Various topics

Where can I dispose of my appliance at the end of its life span?

Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.

Where can I buy accessories, consumables or spare parts for my appliance?

Please go to the “Accessories” section of the website to easily find whatever you need for your product.

What are the guarantee conditions of my appliance?

Find more detailed information in the Guarantee section of this website.

Technical supportYour device stops during operation and the light/s flash very quickly.Your device may be overheating.
Turn the device off and let it cool for at least 1 hour.
If the problem persists, contact Customer Service.The charger is connected but your device is not charging.The charger is not properly connected to the device or is faulty.
Check that the charger is properly connected or contact an Approved Services Centre to change the charger.The device has stopped after the charge light flashed.The device is discharged, please recharge it.The charger becomes hot.This is perfectly normal. The vacuum cleaner can remain permanently connected to the charger without any risk.The power-brush stops during use of the vacuum cleaner.The heat safety device has triggered.
Stop the vacuum cleaner. Check that nothing is obstructing the rotation of the brush. If there is an obstruction, remove it and clean the power-brush, then turn on the vacuum cleaner.Your vacuum cleaner suction is not working properly or is making a whistling noise.• The tube or hose is partially blocked: unblock them.
• The dust collector is full: empty it and clean it.
• The dust collector is not properly fitted: re-position it correctly.
• The suction head is dirty: remove the power-brush and clean it.
• The foam motor protection filter is full: clean it.The power-brush is not working properly or makes a noise.• The rotating brush or hose are obstructed: stop the vacuum and clean the parts.
• The brush is worn: contact an Approved Service Centre to change the brush.
• The belt is worn: contact an Approved Service Centre to change the belt.When charging the vacuum cleaner, the light(s) flash very quickly.The correct charger is not being used or the charger is faulty.
Talk to an Approved Service Centre to change the charger.What should I do if my appliance is not working?After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centreWhat should I do if the power cord of my appliance is damaged?Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.Why is my vacuum cleaner's performance going down?Check the filter, if it is in bad condition, change it.
Empty the dust container.
Check the brush condition and refurbish or change it if necessary.Why is the autonomy of my vacuum cleaner decreasing?Check that the battery is fully charged after a complete charging cycle.
If the battery is faulty, please replace it.Various topicsWhere can I dispose of my appliance at the end of its life span?Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.Where can I buy accessories, consumables or spare parts for my appliance?Please go to the “Accessories” section of the website to easily find whatever you need for your product.What are the guarantee conditions of my appliance?Find more detailed information in the Guarantee section of this website.

CORDLESS ST. CLEANER X-PERT 3.60

TEFAL CORDLESS ST. CLEANER X-PERT 3.60

The TEFAL X-Pert Cordless Vacuum Cleaner

45 minutes* of autonomy

Motorized brush for quick cleaning

22V Lithium battery

3-in-1 cleaning from floor to ceiling

Ultra-light

LED lights for better visibility

Enhanced comfort in use

All-floors = 1 brush

Easy-charging with removable battery