TEFAL PRO STYLE 2 - 1700W IT3420 UPRIGHT GARMENT STEAMER

برو ستايل IT3420 لأفضل نتائج الكيّ بالبخار في المنزل

الكيّ الاحترافي بالبخار أصبح في متناول اليد

مكواة البخار برو ستايل IT3420M0 من تيفال تزيل بسهولة أي تجاعيد من على جميع أنواع الأقمشة، بما في ذلك الأكثر رقّةً بينها، وذلك بفضل قابلية تعديل تدفق البخار. كما أن مكواة البخار هي الأداة المثالية لتحسين مظهر جميع أنواع الملابس وتعقيمها.

Reference: IT3420M0

مكواة البخار برو ستايل من تيفال: الكيّ بالبخار بأعلى كفاءة أصبح اليوم في منزلك  

تعمل مكواة البخار برو ستايل من تيفال على تنعيم التجعيدات وإزالتها من أي نسيج بسهولة قصوى. مكواة البخار هذه ذات كفاءة عالية ومثالية لجلسات الكي بالبخار المكثفة أو لإضفاء اللمسات التجميلية النهائية، وهي رائعة في توفيرها للوقت مع وقت بدء تشغيل لا يتجاوز 45 ثانية فقط. لست بحاجة بعد اليوم إلى طاولة الكي أو للذهاب في رحلات لا نهاية لها إلى محلّات الغسل الجاف. ورغم أن مكواة البخار هذه صغيرة الحجم، إلا أنها عالية الكفاءة، وقد تم تجهيزها بميزات لتوفير مستوى استثنائي من الراحة وسهولة الاستخدام، وبالإضافة إلى الملابس، يمكن استخدامها أيضًا لتحسين مظهر الأرائك والستائر والأغطية أو تعقيمها. كما يعني وجود خزان ماءٍ قابلٍ للإزالة عدم وجود قيود على طول أنبوب البخار. ستوفر لك مكواة البخار هذه الوقت والطاقة، مستفيدةً من قدرتها العالية التي تبلغ 1700W وتدفق بخار بقوة 30g/min لتوزيعٍ عميقٍ ومثالي للبخار في الأقمشة.
Essentials
  • Time saving & precision

    Large metal steam head with pointed tip to remove creases efficiently on  all fabrics 

  • Fast Heat up 

    No need to go to the dry cleaner. Linen care sessions are made quicker with a fast 45-second heat-up time and no need for an ironing board.

  • Ease of use

    Simple on/off setting and a 1,5L water tank with continuous refill, for up to 40 minutes of steaming. Perfect for intensive steaming sessions and last minute touch-ups. 

     

  • Refreshes & Sanitizes

    1700W, referesh, Sanitize and kills bacteria on all garments, textiles 

Features
Power 1700  
Steam output 30  g/min
Heat-up time 45  s
Water tank capacity 1,5  L
Autonomy 50  min
Colours Black / Beige  
Documentation
FAQ
Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.

Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water

In order to ensure the best performance from your iron, these types of water should not be used for ironing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.